Industrial Meters

Features:

• High efficiency,
• Require less maintenance,
• Industry approved design

Features :

• Rugged construction
• Long operational life
• Excellent performance

Other Details :

• Multi range with selectable or auto-ranging options - One tester measures from pure water to waste water!
• Large Display Screen - Displays mode, ATC, battery level and temperature.
• User-Replaceable Sensor - Replace the sensors yourself. Sensors lasts longer with element made of SS316 stainless steel and sensor casing made of VALOX®
• Adjustable TDS Factor - Select the appropriate TDS factor from 0.4 to 1.0 for more accurate measurements.
• Waterproof, Anti-roll Design - IP67 waterproof housing keeps tester good even under wet conditions. Unique anti-roll ribbed design ensures firm grip.

Description :

• Accuracy ±1 % of full scale
• ATC Yes (0 to 50 °C / 32 to 122 ºF)
• Temperature Coefficient 2 % per °C, fixed
• Calibration Point 3 manual
• Temperature Display Yes
• Non-Volatile Memory Yes
• Auto Power-Off 8.5 minutes after last key pressed
• Power Requirement 4 x 1.5 V 'A76' micro alkaline batteries (included)
• Battery Life More than 150 hours

Features :

• Sturdy construction
• Durability
• Compact design

Other Details:

• Easy Calibration can be performed at 100% and/or 0% and mg/l or ppm against a known solution
• Automatic Temperature Compensation (ATC) guarantees the highest accuracy under varying temperature condition
• Galvanic Cell allows instantaneous measurements, producing quick responses and eliminates polarisation; requires minimal maintenance
• Hold Function momentarily freezes reading for easy viewing
• Auto-Power Off saves battery power after non-use
• Self-Diagnostic with message codes for easy troubleshooting
• Large Custom LCD provides optimum viewing even at a distance
• Protective Rubber Boot shields meter from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Description :

• Dissolved Oxygen Range 0 to 20.00 mg/l or ppm
• Resolution Accuracy 0.01 mg/l or 0.01 ppm ±1.5% Full Scale
• % Saturation of Oxygen 0.0 to 200/0 %   
• Barometric Pressure Correction 500 to 1499 mmHg or 66.6 to 199.9 kPA
• Method Automatic correction after manual input
• No. of Calibration Points Up to 2 points; 100% in air and/or
• 0% in known solution
• Special Functions Self-diagnostic; Electrode characteristics;
• Hold Auto-Power Off after20 minutes

SALIENT FEATURES :

• Based on Faraday’s law of electromagnetic induction
• Flow tube sizes 10 mm to 600 mm
• Coil assembly in hermetically sealed welded construction
• Integral or remote transmitter
• Field interchangeable electronics
• High linearity due to characteristic magnetic field
• Absolute zero stability and noise elimination due pulsed DC excitation
• High long term stability and reliability
• PPLICATIONS Chemical, Petrochemical and Process Industries
• Fertilizer Industries
• Pharmaceutical Industries
• Food and Drug Industries
• Sugar, Beverage Industries
• Paper and Pulp Industries
• Water and waste water management
• Dredging Industries
• Mining Industries

ORDER SELECTION GUIDE :

• Flowmeter Size (DN) 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
• Liner Material PTFE, Hard Rubber, Neoprene, Polyurethene
• Electrode Material SS 316, Hastelloy C, Tantalum, Titanium, Platinum
• Flange / End Connection ANSI 150, BS 10 Table D
• Flange and Coil Housing Material Carbon Steel, SS316
• Flow Transmitter Integral without Display, Integral with Display,Remote without Display or Remote with Display

Features :

• Industry approved design
• Smooth functioning
• Require less maintenance

Other Details :

• Large Display Screen - dual display LCD for enhanced readability, provides comprehensive meter information
• Waterproof, Dust proof Housing - IP67 rated, maintains the integrity of your tester even in harsh conditions. Plus it floats!
• User-Replaceable Sensor - reuse the same meter body many times
• Double Junction Sensor offers longer lasting usage
• Push-Button Calibration with Auto-Buffer Recognition - quick, easy calibration with no calibration mistakes
• Automatic Temperature Compensation (ATC) - ensures optimum accuracy under fluctuating temperatures
• Choice of USA or NIST pH buffer standards with up to 3 points
• Temperature Display Readout simultaneously
• Auto-Power Off saves battery power after non-use
• Hold Function freezes reading momentarily for easy viewing
• Self-Diagnostic for easy troubleshooting (e.g battery indicator, message codes)

Features :

• Low maintenance
• Sturdy construction
• High functionality

Other Details :

• Multi range with selectable or auto-ranging options - One tester measures from pure water to waste water!
• Large Display Screen - Displays mode, ATC, battery level and temperature.
• User-Replaceable Sensor - Replace the sensors yourself. Sensors lasts longer with element made of SS316 stainless steel and sensor casing made of VALOX®
• Adjustable TDS Factor - Select the appropriate TDS factor from 0.4 to 1.0 for more accurate measurements.
• Waterproof, Anti-roll Design - IP67 waterproof housing keeps tester good even under wet conditions. Unique anti-roll ribbed design ensures firm grip.